Electronic electric single seat regulating valve, consisting of electronic electric actuator and single seat valve, is suitable for small pressure differential conditions. Electric actuator built-in servo system, no need to match the servo amplifier, input signal and power supply can control the operation. The structure is compact, the fluid channel is S streamline. It has the advantages of small volume, light weight, low pressure drop, large flow, wide adjustable range and high accuracy of flow characteristics. The application of precise control of minute traffic. Such as fine chemical, food additive, medical flower, electronic industry.

Standard technical parameters

Body type: single, double seat, sleeve

Nominal size: DN20-DN200

Nominal pressure: ANSI150, 300, 600LB

JIS10, 16, 20, 30, 40K

PN1.6, 2.5, 4.0, 6.4 MPa

Connection mode: flange: FF, RF, RJ and LG

Flange standard: ANSI B16.5, JIS B2201

JB/T79.1 PN1.6 MPa, JB/T79.2

Threads: DIN, NPT, RC, BSP, G, etc

Welding: GB12224-89

Sealing surface: PN16 convex surface, PN40, PN63, PN100 are concave surfaces

Material: WCB, 304, 316, 316L

On the cover: standard (- 20 ℃ ~ + 200 ℃)

Low temperature type (-60 ℃ ~ 196 ℃) single seat valve structure

Cooling type (-40 ℃ ~ 450 ℃)

Bellows seal type

Gland form: pressure plate type

Fillings: v-type fluoroteflon, flexible graphite

In the valve components

Valve core form: single cylinder, double seat, sleeve

Valve seat: 304, 316, 316 + STL

Flow characteristics: equal percentage, linear, fast

Actuator

Form: electric actuator

Action form: positive action and reaction

Control mode: proportional regulator or switch type

Input signal: 4-20mA, 0-10v, 1-5v, on-off

Output signal: 4-20mA or passive contact signal

Source: AC220V, AC380V, DC24V, etc

Explosion-proof level: ExdIIBT4, ExdIICT6 or other (optional)

Manual device: with handle

Attachment (as required)

Heater and overload protection

Performance

Rated KV value: reference table

Traffic characteristics: linear, equal percentage, fast

Adjustable range: 50:1

Leakage level: metal seal: less than 0.01 (ANSI b16.104-1976iv)

Soft seal: less than 0.00001%

Back to the poor: ≤1%

Dead zones: ≤1%

Basic error: ±1%