In order to prevent fluid backflow in the pipeline during operation, a hydraulic ball valve needs to be installed on the pipeline. Therefore, the type and specification of hydraulic ball valve meeting the service requirements shall be purchased from the manufacturer of hydraulic ball valve. So, in order to ensure the normal use after installation, what should be paid attention to when installing the hydraulic ball valve? Next, the manufacturer of reliable hydraulic ball valve will tell you.

1.The hydraulic ball valve shall not bear weight

Although the quality of the hydraulic ball valve produced by the manufacturer of the hydraulic ball valve is very good, attention should be paid to avoid bearing the weight of the hydraulic ball valve in the pipeline during installation, because this weight is easy to damage the hydraulic ball valve and affect its judgment of water flow pressure. If the installation object is a large hydraulic ball valve, it shall also have an independent support to prevent the hydraulic ball valve from being affected by the pressure generated by the pipeline system.

2.Pay attention to the installation direction

Hydraulic ball valves are usually marked with corresponding marks to indicate the installation direction of hydraulic ball valves. If you don't know how to install the hydraulic ball valve during installation, in order to avoid normal use after installation, when installing the hydraulic ball valve produced by the hydraulic ball valve manufacturer, you must pay attention to maintaining the correct direction to make the medium flow direction consistent with the arrow direction marked on the valve body.

3.Be careful not to put too much pressure

Although the intelligent hydraulic ball valve judges the water flow and controls the valve through pressure, the hydraulic ball valve produced by the hydraulic ball valve manufacturer also has certain pressure restrictions. Therefore, when installing the hydraulic ball valve, care must be taken not to place it in the system with particularly high pressure. If the pressure is too high, it is easy to damage the check valve.

When installing the hydraulic ball valve produced by the manufacturer of hydraulic ball valve, do not let the hydraulic ball valve bear large weight, pay attention to the correct direction, and do not install it in the high pressure system. Therefore, after purchasing the hydraulic ball valve with guaranteed quality from the hydraulic ball valve manufacturer, it shall be installed in the correct way.